Maricic - Digital Electronics-Period 7 Assignments

You may add pictures of your work to the document or you may scan all of your work as one document.

Please follow the instructions on the pdf and paste a picture and a link for each part into the answer sheet (google doc)

I will give a little bit of extra credit if turned in on time.

Please follow the instructions on the assignment.

Please follow the instructions on the attached document.  You will create a report and upload it here.  The attached spreadsheet has the list of assigned numbers.  Your project must count to the number that is assigned to you.

Please have your introduction to the project and put the sketches of your brainstorming into a google doc and upload.

Complete the activity on the attached document.  If it says "print" it means to paste a picture.

Work on your activity that is due Friday.

Please follow the instructions on the pdf document and then put all of your answers and work onto the Answer sheet google doc.  You will need to login to your mypltw.org account to view part of the assignment.  Please let me know if you have forgotten your login information.

Work on Activity 3.2.2 and get through at least #5.

Follow the instructions on the document.

Work on your activity 3.2.1

Please follow the instructions on the Activity and paste your pictures and links onto the attached document.

Please work on Activity 3.1.3 and turn it in.

Please complete the activity on the attached document.

Finish Activity 3.1.2 if you didn't finish it yesterday. Review the PowerPoint 3.1.2 Flip-Flop Applications for Friday's activity about shift registers.

Please work on your Activity 3.1.1

Please complete the study guide. You may print and do your work and then upload as one document or you may do your work on scratch paper, take pictures and insert them into the document. Please make sure that either way it is ONLY one document.

Follow instructions on document. This part will have your tinkercad breadboard

Follow Instructions on the document. This part will include your hand drawn circuits and multisim simulation.

What has been the most difficult part of the Date of Birth Project. Please explain.

Work on your project.

Work on your project for 20 mins

Follow the instructions on the document. You will create a report to upload here. This will be part 1, it will include the Introduction, Truth table, Kmaps and expressions.

Please SHOW ALL WORK. You may insert pictures of your work into the attached document or do all of the assignment on a paper that you scan and upload. Please do one or the other and do not split work between multiple documents. I will only grade one document.

Please complete the activity using the attached google document.

Please either use kami to modify document or print and do by hand and then scan the whole document as one document to upload.

Work on Activity 2.3.2 and answer the following question: Is there a part of this activity that you are struggling with or would like me to go over at the beginning of class tomorrow? If none, just put none.

You must show your work. You may insert pictures into the document or do all work on separate piece of paper and scan and upload. Please do either all on the attached document or all on separate scanned document.

Please upload your report with the Simulation and Prototyping part of the report. Include the links to the files

Work on your project for 20 minutes.

Please follow the instructions on the attached document. You will be creating a report using google docs and uploading it here. This will be the first half of the assignment. Upload the Design section of the report. The multisim and Tinkercad files will be uploaded in a different google assignment.

Please answer all of the questions and show your work. Scan and upload as a pdf document.

This is an optional assignment. It can help your Final Exam grade. You may use kami or print it out and do it by hand and then scan and upload.

Please paste a copy of your hand written drawings into the document.

same instructions as Activity 2.2.2

Study for the final or work on your activities

Please complete the assignment using kami or print and complete the assignment by hand and then scan and upload the document.

Please work on yesterday's assignment or study for the final exam.

Create a report to record your project. Include a title page and table of contents. For the conclusion, upload a separate document.

Please work on your project for 20 mins. Please upload the simplified expression for your majority vote circuit so I can check that it is correct. You can do it on paper and scan a picture of it. Please make sure to make it a pdf. You can also put a picture of it into a google doc, your choice.

Please either complete the assignment by printing it, doing your work, and then scan and upload it as a pdf or you may complete it using kami.

Follow the instructions on the document attached. For some of the circuits you will need to show it to me and get approval.

Please read the handout and answer the questions.

Please work on your project or Activity 2.1.1 for 20 minutes and answer the question.

Please work on your project for 20 mins. See you Friday.

Please follow the instructions in the attached video.

Please complete the activity on the attachment below. Reference your mypltw account for help with tinkercad.

Complete the activity and record your answers on the attachment. You MUST SHOW YOUR WORK. Please upload a copy of your work. You may print the activity and show it there or you may do your work on a separate piece of paper.

Work on Activity 1.2.3. There are 10 kinds of people in the world, those that know binary and those that don't.

Please complete the assignment attached by either using Kami or you may print it and write on it by hand and then scan and upload it. Only use mypltw as a reference, you will not complete it on mypltw. (Make sure to upload a screenshot of what I talked about in class)

Please complete this activity on Multisim Live.

Please work on your Activity 1.2.1 for 20 mins. We will answer questions at the beginning of class but we will not have much time to work on it on Friday.

For this activity, follow the directions on the google doc. Ask if you need help inserting pictures or finding something online.

Please complete the activity using multisim live. Please use the activity on mypltw as a reference only. Use the google doc of Activity 1.1.6 attached here to do your work.

Please work on your Activity 1.1.6 assignment for 20 mins. Remember that it is due on Friday along with a new activity. Please don't forget to submit this assignment.

Please print the activity and complete it by hand. Scan when you finish and upload it here. Don't forget to show all of your work. I have attached the PowerPoint we went over in class as a reference.

Please follow the steps on the Activity on mypltw but put your answers and screenshots of your working simulation in multisim live on the google doc attached here.

Please work on your Activity 1.1.5a for 20mins. Please scan and upload what you are able to get through on the assignment. I do not expect it to be finished, just upload what you are able to get done so far.

Please complete the activity on mypltw.org and upload either the pdf of it or the word document answer sheet.

Please read through PowerPoint 1.1.4 Component Identification Analog. Copy and paste the resistor color code chart onto a google document (name it Resistor Chart) and show one of the examples from the PowerPoint. Include any other notes that you like from the PowerPoint. Please upload your document. This document will be used as your quick reference when doing activities.

Please complete the activity on mypltw.org and save it as a pdf using the print button in the upper right hand corner. Upload your completed Activity and then fill out the conclusion questions attached below.

You will need to be logged into your mypltw.org account to follow the instructions for this Activity. There is also a video to watch there. As you follow the instructions you will need to do screenshots of your simulations on TinkerCAD. You will need to paste those images into the document attached below and you will need to answer the questions. If you have any questions, please let me know.

Please read through the Introduction to Digital Electronics PowerPoint and the Pre-Investigating Basic Circuits PowerPoint. Take notes and upload them to this assignment. You may take notes on a google doc or you may write them by hand and use a scanning app to create a pdf document that you can upload. Camscanner is a good app, if you are not sure how to scan multiple pages into one, let me know and I can help.

Please save your General Safety Quiz using the print symbol in the upper right hand corner of the Courses page once you have completed it and upload the pdf here.

Please fill out this quick survey about yourself.